Base depth and rules

[David Kuijt]

I am thinking I might get away with giving units with a 15mm or 20mm depth a special marker if they get flanked and pushed back. I want to avoid using double-sized bases because I want to have a small footprint game. Making 1MU x 2MU bases in this scale just gets too fiddly, however.

Fiddly is a real issue as you make the stands smaller. And I'm not sure adding markers is a way to reduce that.

I suspect there are a myriad of practical issues involved with playing in a scale where 1mu is smaller than the width of my fingernail. If space was such a concern for me, I'd just go with laser-cut flats of 1mm plywood or something like that, and play on a magnetic board. I've painted 6mm figs and gave it up -- I sure would never even try 3mm. More power to you!

[Macunaima]

Well, these are magneticized laser-cut bases of 1x1 inch. With MUs being a half inch, it should be about as fiddly as a board wargame.

The advantage isn’t so much in playing space as in transport and storage. But even so, a game of Triumph with a 1/2 inch MU gives me a two foot by 16 inch playing space, which can make for a easy game down at the pub.

[David Kuijt]

Well, these are magneticized laser-cut bases of 1x1 inch. With MUs being a half inch, it should be about as fiddly as a board wargame.

The advantage isn’t so much in playing space as in transport and storage. But even so, a game of Triumph with a 1/2 inch MU gives me a two foot by 16 inch playing space, which can make for a easy game down at the pub.

Having big square bases (2mu x 2mu) for everything will reduce the fiddly factor, certainly. It should be a fun game down at the pub, as you say.

My guess would be that the game will be quite different from standard triumph, going back to your original question. I suspect it will play out very orthogonal and grid-like, rather than more free-form, as one impact. But that's just guessing, based upon games with lots of square bases -- and none of those games had more than about 40% square bases.

Best of luck!

[skc]

3mm!? When you're up and running, do post some game photos. Must say I've not seen many of scale under 6mm and even 6mm not that much.