15mm Polybian Romans

A place to share painting tips and photos of painted armies and figures
Post Reply
Dave
Levy
Posts: 5
Joined: Sat Jul 16, 2022 2:20 am

15mm Polybian Romans

Post by Dave » Mon Aug 01, 2022 7:27 pm

I had a giftcard from a rebate for a tire purchase and was looking for something new to try out. I remembered playing Triumph a few years back at a Fall In! so decided to give it a shot. These are 15mm Polybian Romans. The casting on the pilum left a lot to be desired so I decided to give them my "Warmaster High Elf" treatment and convert them up. The hafts are brass tube with a small pin tip glued into them. I them added a block of plasticard as the weight and shaped it with a knife.

Image

The rest were pretty much stock, except for some spear and javelin swaps on the Triarii and Velites. I just need to finish building the cavalry.

Image
Dave
Levy
Posts: 5
Joined: Sat Jul 16, 2022 2:20 am

Re: 15mm Polybian Romans

Post by Dave » Mon Aug 01, 2022 7:28 pm

I started off my Polybian Romans with not painting any Romans at all, but Cretan Archers. I'll be using these as skirmishers. These are closer to true 15mm than the Romans (more 18mm). I'm telling myself that the Romans were just better fed.

Image

Image
Dave
Levy
Posts: 5
Joined: Sat Jul 16, 2022 2:20 am

Re: 15mm Polybian Romans

Post by Dave » Mon Aug 01, 2022 7:28 pm

I've been working on the Velites these past few weeks. Most of the colors have their basecoat down and I'm halfway through painting the red.

Image
User avatar
Brummbär
Companion-at-Arms
Posts: 221
Joined: Thu Jul 30, 2020 8:06 am

Re: 15mm Polybian Romans

Post by Brummbär » Tue Aug 02, 2022 5:05 am

Hi Dave,

Impressive work so far!
One question: if you want to use them for Triumph, why do you base them individually?

Cheers,
Thomas
Texus Maximus
Companion-at-Arms
Posts: 236
Joined: Tue Dec 13, 2016 4:04 am
Location: Dallas, Texas

Re: 15mm Polybian Romans

Post by Texus Maximus » Tue Aug 02, 2022 7:32 pm

Looking good! where did you get thos figures?

Also, nice job with the conversions.
Dave
Levy
Posts: 5
Joined: Sat Jul 16, 2022 2:20 am

Re: 15mm Polybian Romans

Post by Dave » Wed Aug 03, 2022 2:05 am

Thanks guys.

They're based individually so I can use them for skirmish games too (looking at Clash of Spears). The washers are magnetic so I'll be able to drop them into bases of plasticard and magnetic material that I'm going to laser cut.

The figures are from Khurasan.
Dave
Levy
Posts: 5
Joined: Sat Jul 16, 2022 2:20 am

Re: 15mm Polybian Romans

Post by Dave » Tue Aug 16, 2022 1:30 am

I finished up the Velites tonight, the line infantry also has their basecoat of red down as well. I have a small local con coming up where I volunteered to run some Warmaster games so I'm going to take a break from these for a bit to finish up some 10mm terrain. Hopefully I'll be back to painting them in September.

Image

Image
User avatar
Brummbär
Companion-at-Arms
Posts: 221
Joined: Thu Jul 30, 2020 8:06 am

Re: 15mm Polybian Romans

Post by Brummbär » Tue Aug 16, 2022 5:23 am

THey are looking awesome :o
Post Reply